Kitchen ( Ref N: 10709 )
DESCRIPTION: IMPORTANT:
The kitchen compositions are modular. They are composed from different elements (cupboards, drawers, shelves, doors, electrical appliances, sinks, taps, etc.) They can be arranged by adding or removing elements, so they comply with the free space you have. You can choose colors, model and type of doors, glasses, electrical appliances, sinks, taps, etc..
Upon Your wish, our designers may develop an individual offer following Your specific requirements.
DOORS: Ivory Green Blue
GLASS DOORS: Aluminium
SPECIAL DOORS (available for the elements shown in the diagram only) Cherry Beech Aluminium
The door is made from a V100, class E1, fibreboard panel faced on 2 sides with an ivory, green, blue, cherry or beech melamine . The edges are finished with 2mm thick ABS in a colour to match the door.
The aluminium door is made from a V100, class E1, fibreboard panel faced on 2 sides with aluminium laminate. The edges are finished with a 1.5 mm thick sheet of aluminium.
The glass door consists in an anodised aluminium frame with an “0” finish and a 4 mm thick frosted tempered glass panel. It is only available with its specific metal alloy satin finish handle.
STANDARD HANDLE: 160 mm pitch metal alloy “D” handle with a satin finish. Other compatible handles and their relevant fitting positions are listed in the table on page 9.
CARCASSES (the inside is always white): Cherry Beech Ivory Aluminium
PLINTHS: Cherry Beech Imitation aluminium Ruled aluminium
The ruled aluminium plinth requires a surcharge, see page186.
FURNITURE CARCASS AND SHELVES: They are made from 18 mm thick, class E1, fibreboard panels (with a low formaldehyde content) faced with white melamine; only the external side of the side panels is faced with white, ivory, cherry, walnut or beech melamine (see finishes for each model). Carcass sides faced externally with aluminium laminate are available with a surcharge.
The edges are in laminate and have an extruded ABS dust-prevention gasket. The backs are made from a 2.5 mm, class E1, MDF panel.
DRAWER: The drawer is made from runners, sides and back in painted metal. The bottom is made from a 16 mm thick, class E1, fibreboard.
PLINTH: The plinth is made from extruded, stiff, PVC faced with a white, imitation aluminium, cherry, walnut or beech finish (see finishes for each model). A drawn plinth in ribbed, anodised “0” finish aluminium is available on request with a surcharge.
FOOT: Made from black, impact-resistant polystyrene and can be adjusted in height. It is supplied standard 100 mm high but is also available on request 120 mm and 150 mm high.
SHELF: Made from a class E1, 38 mm thick, fibreboard panel, faced with a white, ivory, cherry, walnut or beech finish. It is supplied in a colour to match the carcass.
CORNICE: Made from class E1 MDF faced with a white, cherry, walnut or beech finish. It is supplied in a colour to match the carcass.
WORKTOP: Made from a V100, class E1, waterproof fibreboard panel, 38/58 mm thick, faced with high-pressure laminate in the finishes shown in our samples. The 58 mm worktops are available in salt ‘n pepper, ivory, cherry or beech finishes only.
On request, worktops are available in marble, granite, agglomerate, Velvet, stainless steel, laminate with a mutlilayer edge (in the “Millepunti” version only) and laminate with an aluminium edge. These can be found in the price-list section dedicated to worktops where you can also find prices and delivery times.
UPSTAND: Made in extruded, stiff PVC with an upper finishing edge in aluminium and faced with the same finish as the top.
TABLE: The frame is made from a class E1 MDF panel faced with a white, cherry, walnut or beech finish. The legs are made from solid beechwood varnished with acrylic/polyurethane products.
For tables with a metal frame, the base and legs are made from tubular metal varnished with heat-hardening powders.
Laminate tabletop: made from a 38/25* mm thick waterproof, class E1, V100 fibreboard panel, faced with high-pressure laminate in the finishes shown in our samples.
*25 mm thickness only for tables with metal frame, available in ivory, cherry, walnut or beech finishes only.
Veneered tabletop: made from a class E1 fibreboard panel, edged with solid wood and veneered with cherry, walnut or beech. Varnishing is effected with acrylic/poliurethane products.
GENERAL INFORMATION FOR FURNITURE MAINTENANCE
To prevent damage to the kitchen avoid installing the furniture near sources of excessive heat or humidity. All furniture parts must be kept perfectly dry. Wooden or lacquered parts must always be cleaned with a soft cloth dampened in water and then dried thoroughly. Do not rub hard to dry because you could damage the shine of the varnish. The tops must be cleaned with liquid, non-abrasive detergents, and then rinsed and dried carefully. Do not abandon the kitchen or parts of it in the environment after use but call the local waste-disposal company.
Gallery:
